中文/English
破碎系统设备 板式给料机
结构特点
重型板式给料机用于料仓下，可将大块矿石卸出并均匀地向破碎机喂料，广泛 应用于水泥、建材、冶金、矿山等行业。
●结构强度大，采用减震缓冲专利技术可承受料仓的压力及大块矿石卸入料仓的冲击载荷。
High structural strength and patented vibration suppression technology. Able to sustain the pressure from
the material bin and the impact load from big boulders being discharged into the bin;
●槽板坚固结实，采用履带牵引链，耐磨损，免润滑。
The durable grooved plates are driven by pulling chains, which are wear-resistant and lubricant-free;
●槽板下的滑道采用专有技术自润滑材料制造，使用简单，工作可靠。
The sliding way under the grooved plates is made from self-lubricating material, which is easy to use and
operates reliably;
●传动部分为轴端悬挂的行星齿轮减速器，由变频调速电机驱动，给料能力可大范围调节，满足破碎机工作的
需要。
The planetary gearbox attached to the driving is connected to a shaft and driven by variable frequency
motor, enabling the feeding capacity to be adjusted within a wide range, thus matching the requirements
of the crusher;
●根据需要确定给料机的长度，最大安装倾角可达 25 度。
Feeder length is determined by actual requirements, with maximum inclination up to 25 degrees.
技术参数
